Blockmagnet 80.0 x 20.0 x 4.0 mm N35 nickel with 2 countersunk holes

Preview: Blockmagnet 80.0 x 20.0 x 4.0 mm N35 nickel with 2 countersunk holes

Quantity	Price / pcs
To 2 pcs	€9.05 *
from 3 pcs	€8.07 *
from 10 pcs	€7.20 *
from 20 pcs	€6.79 *
from 40 pcs	€6.41 *
from 350 pcs	request a quote!

The prices are VAT included plus extra charges for shipping

Ready for shipment, delivery in 2-4 days

1 pieces: € *

Item number: QM-80x20x04-N-SL
EAN: 4250538423093
Manufacturer: magnets4you
Available on stock: 399 pieces

Blockmagnet made of neodymium with two 4.5 mm countersunk holes and nickel coating. This flat... more

Close menu

Product information

Blockmagnet made of neodymium with two 4.5 mm countersunk holes and nickel coating. This flat magnet (height 4 mm) can be screwed onto components or non-magnetic surfaces with two countersunk screws.

You can use several types of screw, such as slotted screw with countersunk head for wood, machine screw, countersunk screw with Torx or hexagon socket. The top diameter for the screw head is: 9.46 mm.

The North Pole is on the side with the subsidence. For this reason, using two of these magnets in pairs is not possible (repulsion).

So that the neodymium magnets do not break or splinter, simply sink the magnets into the workpiece and protect the raw magnet from direct hits. Our round neodymium pot magnet with hole and countersunk are protected from impact by a steel pot.

Note: If too much force is applied, neodymium magnets can break. We recommend a maximum tightening torque of 2 Nm when screwing on this magnet.

Technical specifications

coating	Nickel (Ni-Cu-Ni)
temperature max.	80 ° C
quality of magnetisation	N35
tolerance	+/- 0,1 mm
material	Neodym
direction of magnetisation	axial (parallel zur Höhe)
Gesamthöhe H	4,0 mm
total length L	80,0 mm
Gewicht	0,047 kg
magnetic force	18,000 kg
Gesamtbreite B	20,0 mm

Technical specifications for magnetization grade N35

Material	Remanence		Coercivity				Energy product		Maximum temperature
	Br		bHc		iHc		(BxH)max
	Gauss (G)	Tesla (T)	kOe	kA/m	kOe	kA/m	MGOe	kJ/m ³	°C
N35	11700-12100	1.17-1.21	10.8-11.5	860-915	≥ 12	≥ 955	33-35	263-279	≤ 80

The product conforms to the European RoHS Community legislation
The product conforms to the European RoHS Community legislation (2002/95/EG - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.
No subject to registration under the REACH Regulation.
Safety Notice
NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.