Neodymium flat bar 80 x 13 x 5 mm with hole and countersink - 24 kg

Optimal use of the adhesive force by installing the neodymium magnet in an elongated U-profile.

With a length of only 80 mm and a height of 5 mm, you get a small magnet system with an adhesive force of approx. 24 kg.

The nickel-plated U-profile protects the strong NdFeB magnet from damage and increases / bundles the adhesive force on one side.
This means that this flat bar magnet is only magnetic on the open side with the countersunk holes!
On the back, the magnet is therefore non-magnetic and has no adhesive force.

The neodymium flat strip only rests with the two U-legs on the metallic adhesive base and thus prevents damage to the glued-in magnet.

With the existing hole with countersink, you can securely attach this holding magnet with an M3 countersunk screw.

Due to the elongated shape, these magnets can also be easily sunk into grooves.

The safer and robust fastening option for industry, workshops, mechanical engineering, trade fair construction and hobby rooms.

• The product conforms to the European RoHS Community legislation

  The product conforms to the European RoHS Community legislation (2002/95/EG - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.
  No subject to registration under the REACH Regulation.

• Safety Notice

  NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!