Ring magnet Ø 28.5 mm with countersink rubberized white

Preview: Ring magnet Ø 28.5 mm with countersink rubberized white - holds 5.9 kg

Quantity	Price / pcs
To 2 pcs	€6.83 *
from 3 pcs	€6.08 *
from 10 pcs	€5.40 *
from 20 pcs	€5.05 *
from 40 pcs	€4.78 *
from 260 pcs	request a quote!

The prices are VAT included plus extra charges for shipping

Ready for shipment, delivery in 2-4 days

Place your order within the next :: hours
and we'll ship your delivery today!
(Not possible with advance payment)

1 pieces: € *

Item number: RMS-28x04x06-N-W
EAN: 4250538424991
Manufacturer: magnets4you
Available on stock: 2441 pieces

This 28.5 mm diameter countersunk neodymium ring magnet has a white rubber coating. The rubber... more

Close menu

Product information

This 28.5 mm diameter countersunk neodymium ring magnet has a white rubber coating. The rubber coating made of TPV protects the surface, prevents scratches and increases slip resistance when used horizontally.

It is also possible to place it quietly on metal.
You can securely fix the magnet with a countersunk screw. The 4.5 mm hole is designed for a screw with a diameter of 4 mm.

The north pole of this magnet is on the sinking side. Two magnets cannot therefore be used in pairs. However, the polarity plays no role in adhesion to metal.

A notice:
If too much force is applied, neodymium magnets can break. We recommend a maximum tightening torque of 2 Nm when screwing on this magnet.

Technical specifications

total diameter D	28,5 mm
inner ring d1	4,5 mm
diameter on top d2	9,4 mm
temperature max.	80 ° C
quality of magnetisation	N42
material	Neodym
colour	weiß
Gewicht	0,021 kg
magnetic force	5,9 kg
Gesamthöhe H	6,5 mm
Ummantelung	Gummi (TPV)

The product conforms to the European RoHS Community legislation
The product conforms to the European RoHS Community legislation (2002/95/EG - RoHS - Restriction of Hazardous Substances) relating to the use and the employment of certain hazardous substances in electrical and electronic devices.
No subject to registration under the REACH Regulation.
Safety Notice
NdFeB magnets are hard and brittle. Especially with thinner dimensions / higher adhesive forces, these can easily break or splinter! An uncontrolled impact of two magnets as well as an external, mechanical shock or pressure load should therefore be avoided!
Determination of the magnetic force
The adhesive force of our magnets is determined at room temperature on a polished plate made of steel S235JR (ST37) with a thickness of 10 mm by the vertical withdrawal of the magnet (1kg ~ 10 N). A different value down to -10% compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Please note that for thinner, painted and not absolute plan undergrounds the adhesive force represents only one raction of the specified values.